Powakaddy Mechanical 
Components
IMPORTANT INFORMATION: When changing clutches it is worth examining the axle blocks held in place by the rivet through the frame near each clutch. These are the black plastic mouldings (PK3022kit) under each side of the chassis and the axle runs through them. Wiggle the axle up and down and if the axle block holes are elongated they should be replaced. Failure to replace them will mean the axle can move up and down excessively and will cause wear and tear on the gearbox.
If you can not see the items that you require, please contact
Steven on 01689 855660 or Email.
Click on the picture to enlarge the image.
|
